ZyXEL Communications P-870HN-5xb - The Advanced Setup Screen

Chapter 7 Wireless LAN
P-870HN-5xb User’s Guide
133
7.9 The Advanced Setup Screen
To configure advanced wireless settings, click Network > Wireless LAN >
Advanced Setup. The screen appears as shown.
Figure 64 Wireless LAN > Advanced Setup
The following table describes the labels in this screen.
SSID This is available only when you select Enabled(Scan) in the Bridge
Restrict field.
This shows the SSID of the available wireless device within range.
BSSID This is available only when you select Enabled(Scan) in the Bridge
Restrict field.
This shows the MAC address of the available wireless device within
range.
Refresh Click Refresh to update the Remote Bridges MAC Address table
when Bridge Restrict is set to Enabled(Scan).
Apply Click Apply to save your changes to Device.
Table 36 Network > Wireless LAN > WDS
LABEL DESCRIPTION
Table 37 Wireless LAN > Advanced Setup
LABEL DESCRIPTION
RTS/CTS
Threshold
Enter a value between 0 and 2347.
Fragmentation
Threshold
This is the maximum data fragment size that can be sent. Enter a value
between 256 and 2346.