Chapter 13 Policy Forwarding
P-870HN-5xb User’s Guide
186
The following table describes the labels in this screen.
13.2.1 Policy Forwarding Setup
Click the Add button in the Policy Forwarding screen. Use this screen to
configure the required information for a policy route.
Figure 97 Policy Forwarding: Add
The following table describes the labels in this screen.
Table 62 Advanced > Policy Forwarding
LABEL DESCRIPTION
Policy Name This is the name of the rule.
SourceIP This is the source IP address.
SourceSubnet
Mask
This is the source subnet mask.
Protocol This is the IP protocol.
SourcePort This is the source port number.
SourceMAC This is the source MAC address.
Interface This is the WAN interface through which the traffic is routed.
Remove Click the icon to remove a rule from the Device. A window displays asking
you to confirm that you want to delete the rule.
Add Click this to create a new rule.
Table 63 Policy Forwarding: Add
LABEL DESCRIPTION
Policy Name Enter a descriptive name of up to 16 printable English keyboard
characters, including spaces.
Source IP
Address
Enter the source IP address.
Source Subnet
Mask
Enter the source subnet mask.
Protocol Select the IP protocol (TCP or UDP).
To Next Page
Loading...
