ZyXEL Communications P-870HN-5xb - Chapter 2 Tutorials; Configuring the AP; Example Parameters; How to Set up a Wireless Network

P-870HN-5xb User’s Guide
27
CHAPTER 2
Tutorials
This chapter shows you how to set up a wireless network (see page 27) and how
to set up multiple VDSL connection groups (see page 38).
2.1 How to Set up a Wireless Network
This tutorial gives you examples of how to set up an access point and wireless
client for wireless communication using the following parameters. The wireless
clients can access the Internet through an AP wirelessly.
2.1.1 Example Parameters
An access point (AP) or wireless router is referred to as “AP” and a computer with
a wireless network card or USB/PCI adapter is referred to as “wireless client” here.
We use the Device web screens and M-302 utility screens as an example. The
screens may vary slightly for different models.
2.1.2 Configuring the AP
Follow the steps below to configure the wireless settings on your AP.
SSID SSID_Example3
Security WPA-PSK
(Pre-Shared Key: ThisismyWPA-PSKpre-sharedkey)
802.11 mode IEEE 802.11b/g