ZyXEL Communications P-870HN-5xb - The Service Control Screen

Chapter 18 Remote Management
P-870HN-5xb User’s Guide
224
18.4 The Service Control Screen
Click Advanced > Remote MGMT > Service Control to open the following
screen. Use this screen to decide what services you may use to access which
Device interface.
Figure 112 Service Control
The following table describes the fields in this screen.
Table 80 Access Control: Services
LABEL DESCRIPTION
Service Control Select Enable to turn on service control. Otherwise, select Disable.
# This is the index number of the entry.
Services This is the service you may use to access the Device.
LAN Select the Enable check box for the corresponding services that you
want to allow access to the Device from the LAN.
WAN Select the Enable check box for the corresponding services that you
want to allow access to the Device from the WAN.
Apply Click this button to save your changes back to the Device.