Chapter 19 Universal Plug-and-Play (UPnP)
P-870HN-5xb User’s Guide
229
The following table describes the fields in this screen.
19.4 Installing UPnP in Windows Example
This section shows how to install UPnP in Windows Me and Windows XP.
Installing UPnP in Windows Me
Follow the steps below to install the UPnP in Windows Me.
1 Click Start and Control Panel. Double-click Add/Remove Programs.
Table 83 Advanced > UPnP
LABEL DESCRIPTION
Enable Universal Plug
and Play (UPnP) Feature
Select this check box to enable UPnP. Be aware that anyone
could use a UPnP application to open the Web Configurator's
login screen without entering the Device's IP address
(although you must still enter the password to access the web
configurator).
Apply/Save Click this to save the setting to the Device.
Cancel Click this to return to the previously saved settings.
To Next Page
Loading...
