ZyXEL Communications P-870HN-5xb - Interface Grouping Criteria

Chapter 21 Interface Group
P-870HN-5xb User’s Guide
249
21.2.2 Interface Grouping Criteria
Click the Add button in the Interface Grouping Configuration screen to open
the following screen.
Figure 137 Interface Grouping Criteria
The following table describes the fields in this screen.
Table 90 Interface Grouping Criteria
LABEL DESCRIPTION
Source MAC
Address
Enter the source MAC address of the packet.
DHCP Option 60 Select this option and enter the Vendor Class Identifier (Option 60) of
the matched traffic, such as the type of the hardware or firmware.
Enable wildcard
on DHCP option
60 option
Select this option to be able to use wildcards in the Vendor Class
Identifier configured for DHCP option 60.
DHCP Option 61 Select this and enter the device identity of the matched traffic.
IAID Enter the Identity Association Identifier (IAID) of the device, for
example, the WAN connection index number.
DUID Type Select DUID-LLT (DUID Based on Link-layer Address Plus Time) to
enter the hardware type, a time value and the MAC address of the
device.
Select DUID-EN (DUID Assigned by Vendor Based upon Enterprise
Number) to enter the vendor’s registered enterprise number.
Select DUID-LL (DUID Based on Link-layer Address) to enter the
device’s hardware type and hardware address (MAC address) in the
following fields.
Select Other to enter any string that identifies the device in the DUID
field.