Chapter 21 Interface Group
P-870HN-5xb User’s Guide
248
The following table describes the fields in this screen.
Table 89 Interface Group Configuration
LABEL DESCRIPTION
Group Name Enter a name to identify this group.
WAN Interface
used in the
grouping
Select WAN interfaces to be used in this group. The group can have up
to one PTM interface and up to one ATM interface.
Select None to not add any of a type of WAN interface (PTM or ATM)
to this group.
Grouped LAN
Interfaces
Available LAN
Interfaces
Select a LAN or wireless LAN interface in the Available LAN
Interfaces and use the left-facing arrow to move it to the Grouped
LAN Interfaces to add the interface to this group.
To remove a LAN or wireless LAN interface from the Grouped LAN
Interfaces, use the right-facing arrow.
# This shows the index number of the rule.
Filter Criteria This shows the filtering criteria. The LAN interface on which the
matched traffic is received will belong to this group automatically.
WildCard
Support
This shows if wildcard on DHCP option 60 is enabled.
Remove Click the Remove icon to delete this rule from the Device.
Add Click this button to create a new rule.
Back Click this button to return to the previous screen without saving any
changes.
Apply Click this button to save your settings back to the Device.
To Next Page
Loading...
