ZyXEL Communications P-870HN-5xb - The Restart Screen

Chapter 25 Tools
P-870HN-5xb User’s Guide
268
If the upload was not successful, the following screen will appear. Click Tools >
Configuration to go back to the Configuration screen.
Figure 150 Configuration Upload Error
Reset to Factory Defaults
Click the Reset button to clear all user-entered configuration information and
return the Device to its factory defaults. The following warning screen appears.
Figure 151 Reset Warning Message
You can also press the RESET button on the rear panel to reset the factory
defaults of your Device. Refer to Section 1.6 on page 25 for more information on
the RESET button.
25.4 The Restart Screen
System restart allows you to reboot the Device without turning the power off.
Click Maintenance > Tools > Restart. Click Restart to have the Device reboot.
This does not affect the Device's configuration.
Figure 152 Maintenance > Tools >Restart