ZyXEL Communications P-870HN-5xb - Chapter 3 Introducing the Web Configurator; Web Configurator Overview; Accessing the Web Configurator

P-870HN-5xb User’s Guide
51
CHAPTER 3
Introducing the Web
Configurator
This chapter describes how to access and navigate the web configurator.
3.1 Web Configurator Overview
The web configurator is an HTML-based management interface that allows easy
device setup and management via Internet browser. Use Internet Explorer 6.0 and
later or Netscape Navigator 7.0 and later versions. The recommended screen
resolution is 1024 by 768 pixels.
In order to use the web configurator you need to allow:
• Web browser pop-up windows from your device. Web pop-up blocking is enabled
by default in Windows XP SP (Service Pack) 2.
• JavaScripts (enabled by default).
• Java permissions (enabled by default).
See Appendix B on page 317 if you need to make sure these functions are allowed
in Internet Explorer.
3.1.1 Accessing the Web Configurator
1 Make sure your Device hardware is properly connected (refer to the Quick Start
Guide).
2 Launch your web browser.
3 Type "http://192.168.1.1" as the URL.