Chapter 2 Tutorials
P-870HN-5xb User’s Guide
50
2 Select GR2 from the GroupName drop-down list. The IP Address (192.168.3.1)
and IP Subnet Mask (255.255.255.0) is obtained automatically. Select Enable
DHCP and DHCP Server to have the ZyXEL Device act as the DHCP server for the
network. Click Apply when you finish the settings.
2.2.4 Testing the VDSL Connection Groups
To test if the connection groups are successfully configured, you can do the
following: connect your computer to LAN1 of the Device. After a few seconds, your
computer gets a new IP from the WAN side. If you can access Internet by using
this VDSL connection, GR1 is successfully configured.
To test GR2, connect your computer to LAN3 or LAN4 of the Device. After a few
seconds, the IP address of your computer should be renewed to 192.168.3.x
automatically. If you can access Internet by using this VDSL connection, GR2 is
successfully configured.
To Next Page
Loading...
