Chapter 7 Wireless LAN
P-870HN-5xb User’s Guide
127
Use this screen to change your Device’s MAC filter settings. Click the Edit button
in the Wireless LAN > General screen. The following screen displays.
Figure 57 Wireless LAN > MAC Filter
The following table describes the labels in this screen.
7.4.6 Adding a New MAC Filtering Rule
Click the Add button in the MAC Filter screen. The following screen displays.
Figure 58 Wireless LAN > MAC Filter > Add
Table 31 Wireless LAN > MAC Filter
LABEL DESCRIPTION
MAC Restrict
Mode
Define the filter action for the list of MAC addresses in the table below.
Select Disabled to turn off MAC address filtering.
Select Allow to permit access to the Device, MAC addresses not listed will
be denied access to the Device.
Select Deny to block access to the Device, MAC addresses not listed will be
allowed to access the Device
#
This is the index number of the MAC address.
MAC
Address
This is the MAC addresses of the wireless devices that are allowed or denied
access to the Device.
Modify Click the Remove icon to delete the entry.
Back Click this to return to the previous screen without saving changes.
Add Click this to create a new MAC filtering rule.
To Next Page
Loading...
