ZyXEL Communications P-870HN-5xb - The Port Forwarding Edit Screen

Chapter 8 Network Address Translation (NAT)
P-870HN-5xb User’s Guide
150
8.3.1 The Port Forwarding Edit Screen
This screen lets you create or edit a port forwarding rule. Select User Define in
the Service Name field or click the rule’s Edit icon in the Port Forwarding
screen to open the following screen.
Figure 72 Port Forwarding Edit
Internal Start
Port
This is the first internal port number that identifies a service.
Internal End
Port
This is the last internal port number that identifies a service.
Server IP
Address
This field displays the inside IP address of the server.
Modify Click the Edit icon to go to the screen where you can edit the port
forwarding rule.
Click the Remove icon to delete an existing port forwarding rule. Note
that subsequent rules move up by one when you take this action.
Apply Click Apply to save your changes back to the Device.
Cancel Click Cancel to return to the previous configuration.
Table 40 NAT Port Forwarding (continued)
LABEL DESCRIPTION