EasyManua.ls Logo

ZyXEL Communications P-870HN-5xb - Troubleshooting; Chapter 27 Troubleshooting; Power, Hardware Connections, and Leds

ZyXEL Communications P-870HN-5xb
400 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
P-870HN-5xb User’s Guide
275
CHAPTER 27
Troubleshooting
This chapter offers some suggestions to solve problems you might encounter. The
potential problems are divided into the following categories.
Power, Hardware Connections, and LEDs
Device Access and Login
Internet Access
Wireless LAN Troubleshooting
27.1 Power, Hardware Connections, and LEDs
The Device does not turn on. None of the LEDs turn on.
1 Make sure the Device is turned on.
2 Make sure you are using the power adaptor or cord included with the Device.
3 Make sure the power adaptor or cord is connected to the Device and plugged in to
an appropriate power source. Make sure the power source is turned on.
4 Turn the Device off and on.
5 If the problem continues, contact the vendor.
One of the LEDs does not behave as expected.
1 Make sure you understand the normal behavior of the LED. See Section 1.5 on
page 24.
2 Check the hardware connections. See the Quick Start Guide.

Table of Contents

Other manuals for ZyXEL Communications P-870HN-5xb

Related product manuals