ZyXEL Communications P-870HN-5xb - Load Signed Certificate

Chapter 11 Certificate
P-870HN-5xb User’s Guide
176
The following table describes the labels in this screen.
11.3.4 Load Signed Certificate
Click Security > Certificates > Local Certificates and then Load Signed or
the Load Signed Certificate button in the Certificate Details screen of a
certification request to open the Load Certificate screen. Follow the instructions
in this screen to save a valid certificate to replace the request.
Table 55 Certificate Details
LABEL DESCRIPTION
Name This field displays the identifying name of this certificate. If you want
to change the name, type up to 31 characters to identify this
certificate. You may use any character (not including spaces).
Type This field displays general information about the certificate. signed
means that a Certification Authority signed the certificate. request
means this is a certification request.
Subject This field displays information that identifies the owner of the
certificate, such as Common Name (CN), Organization (O), State (ST)
and Country (C).
Certificate This read-only text box displays the certificate in Privacy Enhanced
Mail (PEM) format. PEM uses 64 ASCII characters to convert the
binary certificate into a printable form.
This displays null in a certification request.
You can copy and paste the certificate into an e-mail to send to
friends or colleagues or you can copy and paste the certificate into a
text editor and save the file on a management computer for later
distribution (via floppy disk for example).
Private Key This read-only text box displays the private key in Privacy Enhanced
Mail (PEM) format. PEM uses 64 ASCII characters to convert the
binary certificate into a printable form.
You can copy and paste the private key into an e-mail to send to
friends or colleagues or you can copy and paste the certificate into a
text editor and save the file on a management computer for later
distribution (via floppy disk for example).
Signing Request This read-only text box displays the request information in Privacy
Enhanced Mail (PEM) format. PEM uses 64 ASCII characters to
convert the binary certificate into a printable form.
This displays null in a signed certificate.
Back Click Back to return to the previous screen.
Load Signed
Certificate
This button is available only in a certification request details screen
Click this to import a certificate signed by the CA to replace the
request.