EasyManua.ls Logo

ZyXEL Communications P-870HN-5xb - Adding URL Filter

ZyXEL Communications P-870HN-5xb
400 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 20 Parental Control
P-870HN-5xb User’s Guide
244
The following table describes the fields in this screen.
20.3.1 Adding URL Filter
Click the Add button in the URL Filter screen to open the following screen.
Figure 133 URL Filter Configuration
The following table describes the fields in this screen.
Table 86 Parental Control > URL Filter
LABEL DESCRIPTION
Enable URL Filter Select the check box to enable URL filtering on the Device.
URL List Type If you select Block, the Device prohibits the users from viewing the
Web sites with the URLs listed below.
If you select Access Only, the Device blocks access to all URLs except
ones listed below.
# This is the index number of the rule.
Active Select the check box to enable the filtering rule.
Address This is the URL of the web site in this rule.
Port This is the port number the web server uses to forward HTTP traffic.
Modify Click the Edit icon to go to the screen where you can edit the rule.
Click the Remove icon to delete an existing rule.
Add Click Add to create a new rule.
Apply Click this button to save your settings back to the Device.
Table 87 URL Filter Configuration
LABEL DESCRIPTION
URL Address Enter the URL of web site to which the Device blocks or allows access.
Port Number Specify the port number the web server uses to forward HTTP traffic.
Back Click this button to return to the previous screen without saving any
changes.
Save/Apply Click this button to save your settings back to the Device.

Table of Contents

Other manuals for ZyXEL Communications P-870HN-5xb

Related product manuals