ZyXEL Communications P-870HN-5xb - Creating MAC Filtering Rules

Chapter 9 MAC Filter
P-870HN-5xb User’s Guide
161
9.2.1 Creating MAC Filtering Rules
In the MAC Filter screen, click Add to display this screen and refer to the
following table for information on the labels.
Figure 80 MAC Filter: Add
The following table describes the labels in this screen.
Frame Direction This displays the direction of travel of frame to which this rule applies.
Remove Select the rule(s) you want to delete in the Remove column and then
click the Remove button.
Add Click Add to create a new rule.
Remove Click Remove to delete the selected rule(s).
Table 47 MAC Filter (continued)
LABEL DESCRIPTION
Table 48 MAC Filtering: Add
LABEL DESCRIPTION
Protocol Type Select the service to which this rule applies.
Destination MAC
Address
Enter a destination MAC address in valid MAC address format, that is,
six hexadecimal character pairs to apply the filter rule to the specified
MAC address. Please note that a blank destination address is
equivalent to Any.
Source MAC
Address
Enter a source MAC address in valid MAC address format, that is, six
hexadecimal character pairs to apply the filter rule to the specified
MAC address. Please note that a blank source address is equivalent to
Any.
Frame Direction Select the travel direction of frame to which this rule applies.