Chapter 16 Quality of Service (QoS)
P-870HN-5xb User’s Guide
198
Use this screen to configure QoS queue assignment.
Figure 102 QoS Queue Setup
The following table describes the labels in this screen.
Table 68 QoS Queue Setup
LABEL DESCRIPTION
Add Click this button to create a new entry.
No. This is the index number of this entry.
Active Select the check box to enable the queue.
Name This shows the descriptive name of this queue.
Interface This shows the name of the Device’s interface through which traffic in this
queue passes.
Priority This shows the priority of this queue.
Weight This shows the weight of this queue.
Buffer
Management
This shows the queue management algorithm used by the Device.
Rate Limit This shows the maximum transmission rate allowed for traffic on this
queue.
Modify Click the Edit icon to go to the screen where you can edit the queue.
Click the Remove icon to delete an existing queue. Note that subsequent
rules move up by one when you take this action.
Apply Click Apply to save your changes back to the Device.
To Next Page
Loading...
