Appendix E IPv6
P-870HN-5xb User’s Guide
363
This example uses Dibbler as the DHCPv6 client. To enable DHCPv6 client on your
computer:
1 Install Dibbler and select the DHCPv6 client option on your computer.
2 After the installation is complete, select Start > All Programs > Dibbler-
DHCPv6 > Client Install as service.
3 Select Start > Control Panel > Administrative Tools > Services.
4 Double click Dibbler - a DHCPv6 client.
5 Click Start and then OK.
6 Now your computer can obtain an IPv6 address from a DHCPv6 server.
To Next Page
Loading...
