ZyXEL Communications P-870HN-5xb - Page 60

Chapter 4 Status Screens
P-870HN-5xb User’s Guide
60
Each field is described in the following table.
Table 4 Status Screen
LABEL DESCRIPTION
Refresh Interval Enter how often you want the Device to update this screen.
Apply Click this to update this screen immediately.
Device
Information
User Name This field displays the Device system name. It is used for identification.
Click this to go to the screen where you can change it.
Model
Number
This is the model name of your device.
Serial
Number
This is the serial number of your device.
MAC
Address
This is the MAC (Media Access Control) or Ethernet address unique to
your Device.
Firmware
Version
This field displays the current version of the firmware inside the device.
It also shows the date the firmware version was created. Click this to go
to the screen where you can change it.
DSL
Firmware
Version
This field displays the current version of the device’s DSL modem code.
WAN 0
Information
Mode This is the method of encapsulation used by your ISP.
IP Address This field displays the current IP address of the Device in the WAN.
IP Subnet
Mask
This field displays the current subnet mask in the WAN.
Primary DNS This field displays the primary DNS server for the WAN.
Secondary DNS This field displays the secondary DNS server for the WAN.
LAN
Information
IP Address This field displays the current IP address of the Device in the LAN. Click
this to go to the screen where you can change it.
IP Subnet
Mask
This field displays the current subnet mask in the LAN.
IPv6
Address/
Mask
This field displays the current IPv6 address and prefix length for the
Device’s WAN interface.
IPv6 Scope This field displays whether the IPv6 address is a link-local or global
address.