ZyXEL Communications P-870HN-5xb - Page 62

Chapter 4 Status Screens
P-870HN-5xb User’s Guide
62
Memory
Usage
This field displays what percentage of the Device’s memory is currently
used. Usually, this percentage should not increase much. If memory
usage does get close to 100%, the Device is probably becoming
unstable, and you should restart the device. See Section 25.4 on page
268, or turn off the device (unplug the power) for a few seconds.
Interface Status
Interface This column displays each interface the Device has.
Status This field indicates whether or not the Device is using the interface.
For the DSL interface, this field displays LinkDown (line is down) or Up
(line is up or connected).
For the LAN interface, this field displays Up when the Device is using
the interface and NoLink when the line is disconnected.
For the WLAN interface, it displays Up when WLAN is enabled or
Disabled when WLAN is not active.
Rate For the DSL interface, it displays the downstream and upstream
transmission rate.
For the LAN interface, this displays the port speed and duplex setting.
For the WLAN interface, it displays the maximum transmission rate.
More Status
WAN Service
Statistics
Click this link to view packet specific statistics of the WAN
connection(s). See Section 4.1.1 on page 63.
Route Info Click this link to view the internal routing table on the Device. See
Section 4.1.2 on page 64.
WLAN
Station List
Click this link to display the MAC address(es) of the wireless stations
that are currently associating with the Device. See Section 4.1.3 on
page 66.
xDSL
Statistics
Click this link to view detailed DSL statistics. See Section 4.1.4 on page
67.
LAN
Statistics
Click this link to view packet specific statistics on the LAN and WLAN
interfaces. See Section 4.1.5 on page 70.
Client List Click this link to view current DHCP client information. See Section
4.1.6 on page 71.
Table 4 Status Screen
LABEL DESCRIPTION