Chapter 5 WAN Setup
P-870HN-5xb User’s Guide
76
Note: The ATM and PTM layer-2 interfaces cannot work at the same time.
Figure 29 Layer 2 Interface: PTM
Figure 30 Layer 2 Interface: ATM
The following table describes the fields in this screen.
Table 11 Layer 2 Interface
LABEL DESCRIPTION
Interface Select an interface for which you want to configure here.
PTM: The Device uses the VDSL technology for data transmission over
the DSL port.
ATM: The Device uses the ADSL technology for data transmission over
the DSL port.
Interface This is the name of the interface.
Vpi This is the Virtual Path Identifier (VPI).
Vci This is the Virtual Channel Identifier (VCI).
Category This is the ATM traffic class.
Link Type This is the DSL link type of the ATM layer-2 interface.
Connection Mode This shows the connection mode of the layer-2 interface.
Remove
To Next Page
Loading...
