Chapter 5 WAN Setup
P-870HN-5xb User’s Guide
84
PPPoE or PPPoA
This screen displays when you select PPP over Ethernet (PPPoE) in the WAN
Service Configuration screen or set the DSL link type to PPPoA for the ATM
interface and configure a WAN connection using the ATM interface.
Figure 37 WAN Configuration: PPPoE
The following table describes the labels in this screen.
Table 16 WAN Configuration: PPPoE or PPPoA
LABEL DESCRIPTION
PPP User Name Enter the user name exactly as your ISP assigned. If assigned a name
in the form user@domain where domain identifies a service name,
then enter both components exactly as given.
PPP Password Enter the password associated with the user name above.
PPPoE Service
Name
Type the name of your PPPoE service here.
This field is not available for a PPPoA connection.
To Next Page
Loading...
