EasyManua.ls Logo

ZyXEL Communications P-870HN-5xb - Page 86

ZyXEL Communications P-870HN-5xb
400 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 5 WAN Setup
P-870HN-5xb User’s Guide
86
WAN IPv6
Address
Enter the IPv6 address assigned by your ISP.
WAN IPv6
Address Prefix
Length
Enter the address prefix length to specify how many most significant
bits in an IPv6 address compose the network address.
6RD (6to4
Tunneling)
Select this option to enable IPv6 to IPv4 tunneling. This will
encapsulate IPv6 to IPv4 packets.
Select Set by DCHP if you want to obtain a 6RD endpoint IP address
from a DHCP server. Select Manual Setting to specify the 6RD
endpoint IP address manually.
6RD Endpoint IP
Address
If you enabled 6RD, specify the 6RD endpoint IP address.
6RD IPv6 Prefix If you enabled 6RD, specify the IPv6 prefix for the endpoint IP
address.
Enable PPP
Debug Mode
Select this option to display PPP debugging messages on the console.
Bridge PPPoE
Frames Between
WAN and Local
Ports
Select this option to forward PPPoE packets from the WAN port to the
LAN ports and from the LAN ports to the WAN port.
In addition to the Device's built-in PPPoE client, you can select this to
allow up to ten hosts on the LAN to use PPPoE client software on their
computers to connect to the ISP via the Device. Each host can have a
separate account and a public WAN IP address.
This is an alternative to NAT for application where NAT is not
appropriate.
Clear this if you do not need to allow hosts on the LAN to use PPPoE
client software on their computers to connect to the ISP.
This field is not available for a PPPoA connection.
Enable IGMP
Multicast Proxy
Select this check box to have the Device act as an IGMP proxy on this
connection. This allows the Device to get subscribing information and
maintain a joined member list for each multicast group. It can reduce
multicast traffic significantly.
Enable MLD
Multicast Proxy
Select Enable to have the ZyXEL Device act as an MLD proxy on this
connection. This allows the ZyXEL Device to get subscription
information and maintain a joined member list for each multicast
group. It can reduce multicas traffic significantly.
Back Click this button to return to the previous screen.
Next Click this button to continue.
Table 16 WAN Configuration: PPPoE or PPPoA
LABEL DESCRIPTION

Table of Contents

Other manuals for ZyXEL Communications P-870HN-5xb

Related product manuals