Chapter 5 WAN Setup
P-870HN-5xb User’s Guide
94
5.6.1.7 Configuration Summary
This read-only screen shows the current WAN connection settings.
Figure 43 WAN Configuration: Configuration Summary
The following table describes the labels in this screen.
Table 22 WAN Configuration: Configuration Summary
LABEL DESCRIPTION
Connection Type This is the encapsulation method used by this connection.
Service Name This is the name of the service.
Service Category This is the ATM traffic class.
This field is blank for a PTM or Ethernet WAN connection.
IP Address This shows whether the WAN IP address is assigned by the ISP,
manually configured or not configurable.
Service State This shows whether this service is active or not.
NAT This shows whether NAT is active or not for this connection.
Full Cone NAT This shows whether full cone NAT is active or not for this connection.
Firewall This shows whether Firewall is active or not for this connection.
IGMP Multicast This shows whether IGMP multicasting is active or not for this
connection.
MLD Multicast This shows whether MLD multicasting is active or not for this
connection.
IPv6 This shows whether IPv6 is active or not for this connection.
Back Click this button to return to the previous screen.
Apply/Save Click this button to save your changes.
To Next Page
Loading...
