ZyXEL Communications PMG5318-B20A - Page 88

Chapter 9 Voice
PMG5318-B20A User’s Guide
88
Each field is described in the following table.
Table 31 VoIP > SIP > SIP Account
LABEL DESCRIPTION
SIP Account Selection
SIP Account
Selection
Select the SIP account you want to see in this screen. If you change this field, the
screen automatically refreshes.
General
Active SIP Account Select this if you want the GPON Device to use this account. Clear it if you do not want
the GPON Device to use this account.
Number Enter your SIP number. In the full SIP URI, this is the part before the @ symbol. You can
use up to 32 printable English keyboard characters.
Authentication
User Name Enter the user name for registering this SIP account, exactly as it was given to you. You
can use up to 128 printable English keyboard characters.
Password Enter the user name for registering this SIP account, exactly as it was given to you. You
can use up to 128 printable English keyboard characters.
Apply
Click this to save your changes.
Cancel
Click this to exit the screen without saving any changes.
Advanced Click this to display the following advanced settings for this SIP account.
Voice Feature
Speaking
Volume
Adjust the incoming (Listening) volume. The options are:
• Minimum, which decreases the volume
• Middle, which makes no adjustments
• Maximum, which increases the volume
Listening
Volume
Adjust the outgoing (Speaking) volume. The options are:
• Minimum, which decreases the volume
• Middle, which makes no adjustments
• Maximum, which increases the volume
Active G.168
(Echo
Cancellation)
Select this if you want to eliminate the echo caused by the sound of your voice
reverberating in the telephone receiver while you talk.
Active VAD
Select this if the GPON Device should transmit smaller packets when you are not
speaking. This reduces the bandwidth used.