Chapter 9 Voice
PMG5318-B20A User’s Guide
89
Audio Codecs
Setting
Disabled
Codec(s)
This field lists codecs the GPON Device will not use. Click the left facing arrow to move
codecs from the Enabled Codec(s) list to this list. Or click the right facing arrow to move
a codec to the Enabled Codec(s) list.
Priority
This field lists the priority in which the GPON Device will attempt to use each codec in
the Enabled Codec(s) list.
Enabled
Codec(s)
This field lists the codecs the GPON Device will use. Click the left facing arrow to move
codecs to the Disabled Codec(s) list. Or click the right facing arrow to move a codec to
the Enabled Codec(s) list. Codec options include:
G.711 provides high voice quality but requires more bandwidth (64 kbps).
• G.711ALaw is typically used in Europe.
• G.711MuLaw is typically used in North America and Japan.
The GPON Device must use the same codec as the peer. When two SIP devices start a
SIP session, they must agree on a codec.
Call Feature
Active Caller ID Select this to enable call transfer on the GPON Device. This allows you to transfer an
incoming call (that you have answered) to another phone.
Active Call Transfer Select this to enable call transfer on the GPON Device. This allows you to transfer an
incoming call (that you have answered) to another phone.
Active Call Waiting Select this to enable call waiting on the GPON Device. This allows you to place a call on
hold while you answer another incoming call on the same telephone (directory) number.
Call Waiting
Reject Timer
Enter the number of seconds for call waiting to stay engaged before disconnecting the
caller.
Active
Unconditional
Forward
Select this, then enter a phone number to which incoming calls are forwarded.
Active Busy
Forward
Select this if you want the GPON Device to forward incoming calls to the specified phone
number if the phone port is busy.
Specify the phone number in the field on the right.
If you have call waiting, the incoming call is forwarded to the specified phone number if
you reject or ignore the second incoming call.
Active No Answer
Forward
Select this, then enter a phone number to which calls are forwarded when the phone is
not answered.
No Answer Ring
Count
Enter the number of rings the GPON Device waits before forwarding unanswered calls.
Apply
Click this to save your changes.
Cancel Click this to exit the screen without saving any changes.
Basic Click this to hide the advanced settings on this screen.
Table 31 VoIP > SIP > SIP Account (continued)
LABEL DESCRIPTION
To Next Page
Loading...
