Chapter 9 Routing
VMG1312-B Series User’s Guide
164
You can use source- based policy forwarding t o direct traffic from different users t hrough different
connections or dist ribut e t raffic am ong m ultiple pat hs for load sharing.
The Policy For w a r ding screen let you view and configure rout ing policies on the Device. Click
N et w ork Set t in g > Routing > Policy Forw a rding to open t he follow ing screen.
Figure 62 Net work Setting > Rout ing > Policy Forwarding
The following t able describes t he labels in t his screen.
Table 39 Network Sett ing > Rout ing > Policy Forwarding
LABEL DESCRIPTION
Add new Policy
For w ard Rule
Click this to create a new policy forwar ding rule.
# This is the index num ber of t he entry.
Policy Nam e This is the nam e of the rule.
Source I P This is t he source I P address.
Source Subnet
Mask
his is the source subnet m ask address.
Protocol This is the t ransport layer protocol.
Source Port This is the source port num ber.
WAN This is t he WAN int erface t hrough which the t raffic is rout ed.
Modify Click the Edit icon t o edit t his policy.
Click the D e let e icon to remove a policy from t he Device. A window displays asking you to
confirm that you want to delete the policy.
To Next Page
Loading...
