Chapter 4 Tutorials
VMG1312-B Series User’s Guide
38
4.3.2 Using WPS
This sect ion show s you how to set up a w ireless network using WPS. I t uses t he Device as the AP
and ZyXEL NWD210N as the wireless client which connects t o t he not ebook.
Note: The wireless client m ust be a WPS- aware device ( for exam ple, a WPS USB adapt er
or PCMCI A card).
Ther e are t wo WPS m ethods t o set up t he wireless client set tings:
• Push But t on Configura t ion ( PBC) - sim ply press a but ton. This is t he easier of t he t wo
m et hods.
• PI N Con figurat ion - configure a Personal I dent ification Num ber (PI N) on t he Device. A wireless
client m ust also use t he sam e PI N in order to dow nload t he wireless network sett ings from t he
Device.
Push Button Configuration (PBC)
1 Make sur e t hat your Device is turned on and your notebook is wit hin the cover range of the wireless
signal.
2 Make sure t hat you have inst alled t he wireless client driver and ut ilit y in your not ebook.
3 I n t he wireless client ut ility, go to the WPS set t ing page. Enable WPS and press t he WPS but ton
( St a rt or W PS but ton) .
4 Push and hold t he W PS butt on locat ed on the Device’s front panel for m ore than 5 seconds.
Alt ernatively, you m ay log into Device’s web configurator and go t o the N et w ork Set t ing >
W ireless > W PS screen. Enable the WPS funct ion and click Apply. Then click the Connect butt on.
To Next Page
Loading...
