Chapter 7 Wireless
VMG1312-B Series User’s Guide
118
Use t his screen to view your Device’s MAC filter set t ings and add new MAC filt er rules. Click
N et w ork Set t in g > W irele ss > M AC Aut he n t icat ion . The screen appears as shown.
Figure 36 Wireless > MAC Authent icat ion
The following t able describes t he labels in t his screen.
7.5 The WPS Screen
Use t his screen to configure WiFi Protected Set up ( WPS) on your Device.
WPS allows you t o quickly set up a wireless net work w ith st rong securit y, without having t o
configure security set tings m anually. Set up each WPS connect ion bet ween t w o devices. Bot h
devices m ust support WPS. See
Section 7.10.9.3 on page 134 for m ore inform at ion about WPS.
Table 22 Wireless > MAC Aut hent ication
LABEL DESCRIPTION
SSI D Select the SSI D for which you want t o configure MAC filt er set t ings.
MAC Restrict
Mode
Define t he filt er act ion for t he list of MAC addr esses in t he MAC Address table.
Select Disable to t urn off MAC filt ering.
Select Deny t o block access to t he Device. MAC addresses not listed will be allowed to
access the Device.
Select Allow t o perm it access to t he Device. MAC addr esses not listed will be denied access
to t he Device.
Add new MAC
address
Click this if you want t o add a new MAC address ent r y t o t he MAC filter list below.
Enter the MAC addresses of the wireless devices that are allowed or denied access to t he
Device in these address fields. Ent er t he MAC addresses in a valid MAC address form at , t hat
is, six hexadecim al charact er pairs, for exam ple, 12: 34: 56: 78: 9a: bc.
# This is the index num ber of t he entry.
MAC Address This is the MAC addresses of the w ireless devices t hat are allowed or denied access to t he
Device.
Modify Click the Dele t e icon t o delet e the entry.
Apply Click Apply t o save your changes.
Cancel Click Cance l to exit this screen wit hout saving.
To Next Page
Loading...
