Chapter 8 Home Networking
VMG1312-B Series User’s Guide
144
8.3 The Static DHCP Screen
This table allows you to assign I P addresses on t he LAN to specific individual com put ers based on
their MAC Addresses.
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is
assigned at the factor y and consist s of six pairs of hexadecim al characters, for example,
00: A0: C5: 00: 00: 02.
LAN I Pv6
Address Assign
Setup
Select how you want t o obt ain an I Pv6 address:
• stat e le ss + D N S send by RADVD: The Device uses I Pv6 st at eless aut oconfigurat ion.
RADVD (Rout er Advert isem ent Daem on) is enabled t o have the Device send I Pv6 prefix
inform ation in router advertisem ent s periodically and in response t o router solicitations.
DHCPv6 server is disabled. ( See
page 140 for m ore inform ation on RADVD.)
• stat e le ss + D N S send by DHCPv6 : The Device uses I Pv6 st at eless aut oconfigurat ion.
The DNS is provided by a DHCPv6 server.
• stat e ful + D H CPv6 serve r : The Device uses I Pv6 st ateful autoconfigurat ion. The
DHCPv6 ser ver is enabled to have t he Device act as a DHCPv6 server and pass I Pv6
addresses, DNS server and dom ain nam e inform at ion t o DHCPv6 clients.
• stateful + DHCPv6 rela y: The Dev ice uses I Pv6 st ateful autoconfigurat ion. DH CPv6
Rela y is enabled t o have t he Device relay client DHCPv6 requests.
DHCPv6 Configuration
DHCPv6 State
This shows the status of the DHCPv6.
I Pv6 DNS Values
I Pv6 DNS
Server 1-3
Select Fr om I SP if your I SP dynam ically assigns I Pv 6 DNS server inform ation.
Select User- D e fined if you have t he I Pv6 address of a DNS server. Ent er t he DNS server
I Pv6 addresses t he Device passes t o the DHCP clients.
Select None if you do not want to configure I Pv6 DNS servers.
I Pv6 Address Values
I Pv6 Start
Address
I f DHCPv6 is enabled, specify the first I Pv 6 address in the pool of addresses that can be
assigned to DHCPv6 client s.
I Pv6 End
Address
I f DHCPv6 is enabled, specify t he last I Pv6 address in the pool of addresses that can be
assigned to DHCPv6 client s.
I Pv6 Dom ain
Nam e
I f DHCPv6 is enabled, specify the dom ain nam e t o be assigned t o DHCPv6 client s.
I Pv6 Router Advertisem ent St at e
RADVD St ate
This shows t he st at us of RADVD.
Apply Click Apply to save your changes.
Cancel Click Ca nce l t o rest ore your previously saved settings.
Table 30 Network Sett ing > Hom e Net working > LAN Setup ( cont inued)
LABEL DESCRIPTION
To Next Page
Loading...
