Chapter 10 Quality of Service (QoS)
VMG1312-B Series User’s Guide
173
You can give different priorit ies t o traffic t hat t he Device forwards out through the WAN interface.
Give high priority to voice and video to m ake t hem run m ore sm oothly. Sim ilarly, give low priorit y
to m any large file downloads so t hat they do not r educe t he quality of other applicat ions.
Click Ne t w or k Set t ing > QoS > Cla ss Set up t o open t he following screen.
Figure 67 Net work Sett ing > QoS > Class Set up
The following t able describes t he labels in t his screen.
Table 44 Network Sett ing > QoS > Class Set up
LABEL DESCRIPTION
Add new Classifier Click t his to cr eate a new classifier.
# This is the index num ber of t he entry.
St atus This field displays w hether t he classifier is act iv e or not . A y ellow bulb signifies t h at t h is
classifier is act ive. A gray bulb signifies t hat this classifier is not active.
Class Nam e This is t he nam e of the classifier.
Classification
Criteria
This shows crit eria specified in t his classifier, for exam ple the int erface from which
traffic of this class should com e and t he source MAC address of t raffic that m atches t his
classifier.
DSCP Mark This is t he DSCP num ber added t o traffic of t his classifier.
802.1P Mark This is the I EEE 802.1p priorit y level assigned t o t raffic of t his classifier.
VLAN I D Tag This is t he VLAN I D num ber assigned to t raffic of t his classifier.
To Qu e u e This is the nam e of t he queue in which t raffic of this classifier is put.
Modify Click t he Edit icon to edit t he classifier.
Click the Delete icon t o delet e an existing classifier. Note t hat subsequent rules m ove
up by one when you take t his action.
To Next Page
Loading...
