ZyXEL Communications VMG1312-B Series - Page 175

Chapter 10 Quality of Service (QoS)
VMG1312-B Series User’s Guide
175
The following t able describes t he labels in t his screen.
Table 45 Class Set up: Add/ Edit
LABEL DESCRIPTION
Act ive Select t his to enable t his classifier.
Class Nam e Ent er a descriptive nam e of up to 15 print able English keyboard charact ers, not including
spaces.
Classification
Order
Select an exist ing num ber for where you want t o put this classifier to m ove t he classifier t o
the num ber you selected after clicking Apply.
Select Last to put t his rule in t he back of t he classifier list.
From I nt erface If you want to classify t he traffic by an ingress interface, select an int erface from t he From
I nt e r fa ce drop-down list box.
Ether Type Select a predefined applicat ion to configure a class for t he m at ched traffic.
I f you select I P, you also need t o configure source or dest inat ion MAC address, I P address,
DHCP options, DSCP value or the prot ocol type.
I f you select 8 0 2 .1 Q, you can configur e an 802.1p priorit y level.
Source
Address Select t he check box and enter the source I P address in dot t ed decim al notation. A blank
source I P address m eans any source I P address.
Subnet
Net m ask
Ent er t he source subnet m ask.
Por t Range I f you select TCP or UDP in the I P Prot ocol field, select the check box and enter the port
num ber( s) of t he source.
MAC Select t he check box and ent er the source MAC address of t he packet .
MAC Mask Type t he m ask for the specified MAC address to det erm ine which bits a packet ’s MAC
address should m at ch.
Ent er “ f” for each bit of t he specified source MAC address that t he traffic’s MAC address
should m at ch. Enter “0” for the bit (s) of the m atched traffic’s MAC addr ess, w hich can be of
any hexadecim al charact er( s) . For example, if you set t he MAC address to
00: 13: 49: 00: 00: 00 and t he m ask to ff: ff: ff: 00: 00: 00, a packet with a MAC address of
00: 13: 49: 12: 34: 56 m atches this crit eria.
Exclude Select t his opt ion t o ex clude t he packets that m at ch the specified crit eria from this classifier.
Destination
Address Select t he check box and enter the source I P address in dot t ed decim al notation. A blank
source I P address m eans any source I P address.
Subnet
Net m ask
Ent er t he source subnet m ask.
Por t Range I f you select TCP or UDP in the I P Prot ocol field, select the check box and enter the port
num ber( s) of t he source.
MAC Select t he check box and ent er the source MAC address of t he packet .
MAC Mask Type t he m ask for the specified MAC address to det erm ine which bits a packet ’s MAC
address should m at ch.
Ent er “ f” for each bit of t he specified source MAC address that t he traffic’s MAC address
should m at ch. Enter “0” for the bit (s) of the m atched traffic’s MAC addr ess, w hich can be of
any hexadecim al charact er( s) . For example, if you set t he MAC address to
00: 13: 49: 00: 00: 00 and t he m ask to ff: ff: ff: 00: 00: 00, a packet with a MAC address of
00: 13: 49: 12: 34: 56 m atches this crit eria.
Exclude Select t his opt ion t o ex clude t he packets that m at ch the specified crit eria from this classifier.
Ot her s