Chapter 13 Interface Group
VMG1312-B Series User’s Guide
207
Note: An interface can belong t o only one group at a t im e.
Figure 92 I nterface Group Configuration
The following t able describes t he fields in t his screen.
Table 67 I nt erface Group Configurat ion
LABEL DESCRIPTION
Group Name Enter a nam e t o ident ify this group. You can ent er up t o 30 characters. You can use let t ers,
num bers, hyphens (- ) and underscores ( _). Spaces are not allowed.
WAN I nt erface
used in t he
grouping
Select t he WAN int erface t his group uses. The group can have up to one PTM int erface and
up to one ATM interface.
Select N one to not add a WAN interface to t his group.
Grouped LAN
I nt erfaces
Available LAN
I nt erfaces
Select one or m ore LAN int erfaces (Ethernet LAN, HPNA or w ireless LAN) in t he Ava ilable
LAN I n t erface s list and use the left arrow to m ove t hem to t he Grouped LAN I nte r faces
list to add the interfaces t o this group.
To rem ove a LAN or wireless LAN interface from t he Gr oupe d LAN I nter faces, use the
right-facing arrow.
Autom at ically
Add Clients
With t he
following DHCP
Ven d or I Ds
Click Add t o ident ify LAN host s t o add t o t he int erface group by cr it eria such as the type of
the hardware or firm ware. See
Sect ion 13.2.2 on page 208 for m ore inform at ion.
# This shows t he index num ber of the rule.
Filt er Crit eria This shows t he filtering crit eria. The LAN int erface on which the m at ched t raffic is received
will belong t o this group autom at ically.
WildCard
Support
This shows if wildcard on DHCP opt ion 60 is enabled.
To Next Page
Loading...
