Chapter 35 Diagnostic
VMG1312-B Series User’s Guide
288
Note: This screen is available only when you configure an ATM layer- 2 interface.
Figure 148 Maint enance > Diagnostic > OAM Ping Test
The following t able describes t he fields in t his screen.
Table 110 Maintenance > Diagnostic > OAM Ping Test
LABEL DESCRIPTION
Select a PVC on which you want t o perform t he loopback t est .
F4 segm ent Press this to perform an OAM F4 segm ent loopback t est .
F4 end- end Press this to perform an OAM F4 end-to- end loopback t est .
F5 segm ent Press this to perform an OAM F5 segm ent loopback t est .
F5 end- end Press this to perform an OAM F5 end-to- end loopback t est .
To Next Page
Loading...
