Chapter 6 Broadband
VMG1312-B Series User’s Guide
95
Note: The actual dat a rat e you obtain varies depending the 3G card you use, the signal
st rengt h to t he service provider’s base st at ion, and so on.
Figure 23 Net work Sett ing > Broadband > 3G Backup
The following t able describes t he labels in t his screen.
Table 11 Network Sett ing > Broadband > 3G Backup
LABEL DESCRIPTION
General
3G Backup Select Ena ble t o have the Device use the 3G connect ion as your WAN or a backup when t he
wired WAN connect ion fails.
Ping Check Select Ena ble if you w ant t he Device t o ping check t he connection st at us of your WAN. You
can configure the frequency of t he ping check and num ber of consecut ive failures before
triggering 3G backup.
Check Cycle Ent er t he frequency of the ping check in t his field.
Consecut ive
Fail
Ent er how m any consecutive failures are required before 3G backup is t r iggered.
Ping Default
Gateway
Select t his t o have t he Device ping the WAN int erface’s default gateway I P address.
Ping t he Host Select t his t o have t he Device ping t he particular host nam e or I P address you typed in this
field.
3G Connection Sett ings
Card
description
This field displays t he m anufacturer and m odel nam e of your 3G card if you inser t ed one in
the Device. Other w ise, it displays N/ A.
To Next Page
Loading...
