To Next Page

To Previous Page

PRESETS

By now you are probably ready to start playing some music. We are going to cover that

next. First, let’s make sure you know how to save or undo your changes. Bitbox micro

stores your conguration work as Presets. A number of demonstration presets are

loaded on the micro SD card. Each preset holds a set of 8 pad congurations, along

with Mixer, FX, and Input settings. Note that Mute settings are not saved, and the global

Settings (the rst page when you push TOOLS) are saved on the SD Card apart from

the Presets.

Bitbox micro does not save changes automatically. You

have to save your preset to preserve your changes. If

you turn o the module, or change presets, any changes

you have made to the current preset will be lost.

To Save Changes to a Preset:

1. Touch the name of the preset at the top of the

Pads screen (SL Urban Rem Hip Hop in the

screen shot on the right) to display the Preset

Management screen. This screen shows a list

of the presets stored on the microSD card with

a menu across the top. The currently selected

preset is highlighted in blue.

2. Touch Save or touch File then Save As to save

changes. Save is disabled if there are no

unsaved changes. Save As will create a new

preset with the new name, and the old preset

will keep its original settings.

To Load a Preset:

1. Touch the name of the preset at the top of the

Pads screen to access the Preset

Management screen.

2. Turn a knob to select a preset, then touch Load

to make this the active preset.

Note:

► Bitbox micro does not automatically save your changes. Any unsaved changes

will be lost when you load a preset or power down the module.

Page 11 of 88

Bitbox Micro User Manual 1.0.7

Pads Screen

Preset Management

Screen

Preset Management File

1010music Bitbox Micro 1.0.7 User Manual

Questions and Answers: