To Next Page

To Previous Page

MANAGE PRESETS

Bitbox micro stores a set of pad congurations, FX settings and Mixer settings as a

preset. You can save as many presets as you want, as long as there is room for the les

on your microSD card. When you turn on bitbox micro, it automatically loads the most

recently used preset on this microSD card. The microSD card that comes with bitbox

micro has dozens of presets and corresponding WAV les.

When bitbox micro loads a preset, it loads the set of WAV les and congured

parameters for each pad saved in the preset. Review the provided presets to see some

examples of bitbox micro features in action. The presets that are loaded on bitbox micro

use only a fraction of the WAV les that are available on the microSD card. You can use

the microSD card to load your own WAV les into bitbox micro, as well as record new

ones. Bitbox micro also enables you to customize and create your own presets.

Presets are saved on the microSD card when you choose to save them. If you load a

dierent preset without rst saving the current preset, you will lose your work. If

you change to a dierent microSD card, you will have a dierent set of presets. When

you switch to a dierent preset, all previous settings will be replaced with the settings of

the newly selected preset, which may be blank.

Bitbox micro stores all of the preset xml les in sub-folders under the \Presets folder.

Each preset has its own sub-folder with the name of the preset, and a preset.xml le

within that sub-folder. E.g. the preset My Kickin Grooves will be stored as a le named

preset.xml in the \Presets\My Kickin Grooves folder. When you rst start working with

the preset, it will point to the WAV les in their source folders. The Pack function will

copy all of the used WAV les into the preset folder.

When you create a new recording, it will be stored in the folder for that preset. For

example, the rst new recording for the My Kickin Grooves preset will be saved as

\Presets\My Kickin Grooves\RC000001.wav.

In summary:

■ All of the preset folders are gathered under one \Presets folder at the root.

■ Before you Pack a preset le, the .xml le lives in its own sub-folder under

\Presets which is created as soon as you create a preset, but the WAV les stay

in their source folders until you pack them.

All presets have a le named preset.xml under the folder that has the name of the

preset. This le contains all of the settings for this preset.

We covered how to create a new preset in To Create and Name a Preset above. We will

cover more preset and WAV le management tasks next.

Page 62 of 88

Bitbox Micro User Manual 1.0.7

1010music Bitbox Micro 1.0.7 User Manual

Questions and Answers: