To Next Page

To Previous Page

Page 9 of 88

Bitbox Micro User Manual 1.0.7

Connect a MIDI controller to the MIDI In jack to trigger

pads and modulate parameters. Use the included Mini-

TRS to MIDI 5-PIN DIN adapter if needed. This TRS jack

supports both Mini-TRS type A and Mini-TRS Type B

connections.

Control the Volume

By default, the bitbox micro is congured to play at 80%

volume. Here’s how to adjust that if needed:

1. Touch Tools one time to display the Settings

screen.

2. Turn the top knob until the MasterVol

parameter is highlighted pink.

3. Turn the bottom knob to the desired value.

Test Your Setup

Now let’s see what the module sounds like.

1. Push the Home button until you see the Pads

screen.

2. Touch a pad to trigger playback. You should

hear the sample playing out through the

connected audio output. The pad you touched

will turn pink to show that it is selected. A blue

playback progress bar will grow across the

bottom of the pad as the WAV le play

progresses.

If you don’t hear anything, try touching a dierent pad. If you still don’t hear anything,

push Tools then Home to make sure you really are on the Pads screen. (It will say Pads

at the very top middle of the screen.) Then try touching a pad. Next, check your output

connections and your volume (See above.)

Pads Screen

Settings Screen

1010music Bitbox Micro 1.0.7 User Manual

Questions and Answers: