To Next Page

To Previous Page

Page 12 of 88

Bitbox Micro User Manual 1.0.7

Page 12 of 88

Bitbox Micro User Manual 1.0.7

To Create and Name a Preset:

1. Touch the name of the preset at the top of the

Pads screen (SL Urban Rem Hip Hop in the

screen shot on the right) to display the Preset

Management screen.

2. Touch File then New in the top menu. This will

create the new preset with a default name, and

display the File Naming screen.

3. Turn the knobs to enter a name for the preset.

File naming works like old school arcade

games. Turn the top knob to move the cursor.

Turn the bottom knob to scroll through letters

alphabetically. First capital letters are

displayed, then lower case, then numbers.

4. Touch Enter to save the name and return to the

Presets screen with the new preset selected.

5. Push the PADS button to start working with

your new preset from the Pads screen.

File Naming Screen

Note:

► When bitbox micro rst starts up, it loads the last preset you used on this

microSD card.

1010music Bitbox Micro 1.0.7 User Manual

Questions and Answers: