Copyright 1010music LLC 2020
Page 7 of 88
Bitbox Micro User Manual 1.0.7
Copyright 1010music LLC 2020
Page 7 of 88
Bitbox Micro User Manual 1.0.7
WELCOME
Bitbox micro by 1010music is a compact sampling module for eurorack. With bitbox
micro, you can record and play samples, then trigger them using MIDI and CV. Use
bitbox micro to record individual WAV les, or use Auto-sampling to easily create a
sample bank of your favorite MIDI or CV instrument. You can beat sync your clips to an
external clock or use slices to trigger portions of a WAV le. We will start with a quick
walk through of the basic features to get you started. Then we will go deep and cover all
of the features supported.. Find community, support, wish lists, and rmware updates on
our forum at https://forum.1010music.com.
Document Overview
In this manual, we will rst quickly make sure you have bitbox micro installed in your
eurorack and set up so you can make some sound with it. After that, we will review the
basic controls and screens. Next, we will walk through how to set up pads including a
description of each of the dierent pad modes. We will cover the Keys Input mode, how
to apply FX and how to adjust the mix. After that, we will cover presets and global
settings. That will be followed by discussion of how to use MIDI devices with bitbox
micro, along with some more advanced usage features. Lastly, we will delve into
managing bitbox micro rmware and les, touch on a couple of technical specs and
nally tell you where you can nd more information about bitbox micro and other
1010music products.
This manual was written for version 1.0.7 of the bitbox micro rmware. If you have an
older version, we strongly recommend that you upgrade. See UPDATE FIRMWARE,
AUDIO FILES AND PRESETS below to learn how to upgrade your rmware.
To Next Page
Loading...
Need help?
General