To Next Page

To Previous Page

7. To start recording, touch the REC button at the top of the screen. If you are

using threshold recording, the recording will start once the input level meets

the threshold level specied. If you selected a time value for Length,

recording will stop after the selected length of time. The Load and Record

screen displays a running clock of measures and beats and time duration of

the recording. There may be a delay between when you touch Rec and when

the recording starts as bitbox micro waits to quantize the recording to the

selected Rec Quant time interval. See Synchronize Playback with a Clock

below for more information about clocks and quantization.

8. Touch Stop to end recording. There may be a delay between when you touch

Stop and when the recording ends due to quantization. When the recording

has stopped, the main screen is displayed with the new WAV le loaded in the

selected pad. The le name will be RC with a numeric sux. We will discuss

changing le names and managing WAV les in Manage WAV Files below. If

you have RecToPlay set to ON , bitbox micro will automatically start to play

the new sample when recording ends if the Length parameter was used for

recording.

When you record a new WAV le, the le is stored on the microSD card in the folder

associated with the preset. This folder is located under \Presets and has the same

name as the preset. For example, if your preset name is KickinGroove then your

recordings will be in the folder \Presets\KickinGroove. How you will work with these

les depends on whether you are recording samples to build a library to use in presets

in the future, or whether you are recording WAVs specically for the current preset.

If you are recording WAVs for the current preset:

1. Record WAVS until you get the les you need. The WAVs are stored in the

preset specic folder.

2. Assign the WAVs you want to use to individual pads.

3. Touch the Preset name at the top of the Pads screen to open the Preset

Management screen. If you have any other non-recordings in the preset, you

may want Pack the preset. To do so, touch File and then Pack to create

copies of the other les in the preset folder.

Page 41 of 88

Bitbox Micro User Manual 1.0.7

1010music Bitbox Micro 1.0.7 User Manual

Questions and Answers: