To Next Page

To Previous Page

SETTINGS

The Settings screen is the home for global parameters

that apply across presets. This is where you can adjust

the Master output volume and control the screen

brightness. Push TOOLS to open the Settings screen.

Turn the top knob to select a parameter and turn the

bottom knob to adjust the value of the selected

parameter.

Here are the available settings:

Settings Screen

Parameter Description

Brightness Controls the brightness of the display screen.

MasterVol Controls the volume of the signal going to the Master Left and Master Right outputs

(output jacks 7 and 8).

Compressor When set to On, bitbox micro will apply a compressor to the signals sent to Out 1 and 2.

Pads that are mapped to Outs 3, 4, 5 or 6 will bypass the compressor.

RecToPlay If you have RecToPlay set to ON, bitbox micro will automatically start to play the new

sample when recording ends if the Length parameter was used for recording.

RecCong When this is set to Global, changes made to recording settings on the Pad Loading and

Recording screen will apply to all empty pads. When this is set to Per Pad, these

changes only change the current pad and do not change what is used for other empty

pads. Use Per Pad when you want to set up a Template preset with dierent recording

congurations for each pad.

MIDI Pads This is used to specify which MIDI channel is used to trigger pads. If a channel selected

here is also chosen as the MIDI IN channel for a pad, that pad will also play notes in

response to signals received on this MIDI channel. See the section Use MIDI Devices

with Bitbox micro below for more information.

When this parameter is set to Omni, pad hits can be triggered by all MIDI channels.

However, any MIDI channel that is assigned as the MIDI In for a pad or as the MIDI

Keys parameter will be excluded from the list of channels that will trigger pad hits.

MIDI Program Change messages received on this channel will be processed by the

bitbox micro if the ProgChange parameter is set to ON.

Page 68 of 88

Bitbox Micro User Manual 1.0.7

1010music Bitbox Micro 1.0.7 User Manual

Questions and Answers: