EasyManuals Logo

1010music Bitbox Micro 1.0.7 User Manual

1010music Bitbox Micro 1.0.7
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #84 background imageLoading...
Page #84 background image
UPDATE FIRMWARE, AUDIO FILES AND
PRESETS
You can update the bitbox micro rmware to get the latest features and other updates.
The rmware can be updated with the factory image, which includes the original
presets, or just the rmware itself. You can also choose individual presets to copy over
to your microSD Card.
Switch to a New MicroSD Card While Operating Bitbox micro
You can switch to a dierent microSD card while operating bitbox micro. Simply remove
the current card and insert the new one, then load a preset from the new card as usual.
Just make sure you save any changes before you remove the original card.
Backup Your Presets and WAV Files
Before you use a microSD card to update rmware, backup the les that are stored on
the microSD card:
Remove the microSD card from the bitbox micro module and insert it into your
computer. You may need to use a microSD adapter for your computer (not included).
Copy the les from the microSD card onto your computer.
To Install New Firmware:
Here are the steps required:
1. Download the desired rmware onto your computer. You can nd the latest
rmware images on the forum at https://forum.1010music.com. You must be a
registered user of the forum to access the download les. Forum registration
is free.
2. Unpack the zip le. Some browsers do this automatically for you. Make sure
the name of the .bin le is exactly MICRO.BIN (all upper case). If you have a
previous version on your computer, sometimes the le gets renamed during
download to create a unique le name.
3. Prepare a microSD card with the FAT32, MSDOS Fat, or ExFat format. The
card that comes with bitbox micro is formatted properly, but you may need to
reformat a card that came from somewhere else.
4. If you want to replace the Presets with the factory image, copy the full
contents of the zip le onto a microSD card. If you do not want to overwrite
your presets, copy only the MICRO.BIN le to the microSD card.
5. Turn o power to the module.
Copyright 1010music LLC 2020
Page 84 of 88
Bitbox Micro User Manual 1.0.7

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the 1010music Bitbox Micro 1.0.7 and is the answer not in the manual?

1010music Bitbox Micro 1.0.7 Specifications

General IconGeneral
Brand1010music
ModelBitbox Micro 1.0.7
CategoryControl Unit
LanguageEnglish