1010music Bitbox Micro 1.0.7 User Manual

Slicer
Parameter
Description Range of Values Mod
Target?
Sync
The Sync feature prevents timing drift
that can occur when the length and
BPM of a clip does not align exactly
with the tempo of playback. When Sync
is used, bitbox micro will realign the
audio to match the clock at the step
size specied here.
Even slight dierences between WAV
le BPM and clock tempo can cause
signicant drift over time. Select a
value for Sync that will control the size
of the musical unit to which the clip will
be synchronized. Choose small
settings, like 1/16th, for rhythmic or
percussion clips. Choose large
settings, like 1-bar, for sustained tones
or drones.
OFF – playback will occur at the original
rate. Looping will happen as soon as
the sample ends.
ON – bitbox micro will synchronize the
playback of the slice.
No
Slice
Indicates which slice will be played
when a note is triggered. You can use
modulation to vary this value over time.
1 through the number of slices in the
pad.
Yes
Slice Seq
When Slice Seq is set to a value other
than None, each new note will advance
the selection of the next slice to play.
The value of this parameter controls
the order in which slice selection is
advanced.
Send when modulation is used, every
time the Modulation Source receives a
high signal, the slice sequencer will be
advanced to the next step in the
sequence. Use a CV (not a gate) input
for modulating this parameter.
None: This parameter will not be used
to control the order of playback of slices.
Forward: A trigger will cause the
playback to move to the next slice.
Backwards: A trigger will cause the
playback to move to the previous slice
Random: A trigger will cause the
playback to move to a randomly
selected slice
Stagger: A trigger will cause the
playback to move through the slices in a
somewhat random way. It will move
forward a few slices, then back a couple
of slices, and repeat.
Yes
PlayThru
Controls whether or not playback
continues through the end of the slice.
ON – playback will continue past the
end of the slice to the end of the le.
OFF – playback will stop at the end of
the triggered slice.
No
Copyright 1010music LLC 2020
Page 34 of 88
Bitbox Micro User Manual 1.0.7

1010music Bitbox Micro 1.0.7 Specifications

General

Brand	1010music
Model	Bitbox Micro 1.0.7
Category	Control Unit
Language	English