Installation Guide for the 2GIG EDGE Security Panel
40
Forget Network
Tapping FORGET NETWORK disconnects the 2GIG EDGE Panel from the wireless
network and erases the password so that it will not automatically reconnect to
the network.
Join Other Network
Tapping Join Other Network allows you to join a network not shown in the list.
1. Return to the Wireless Network screen.
2. Tap JOIN OTHER NETWORK.
3. Enter the wireless network name, then tap NEXT.
4. Select the Security Type and Security Mode, then tap NEXT.
5. Enter the password.
WPS
Tapping WPS allows you to connect securely to routers that support WPS.
1. Tap WPS on 2GIG EDGE Panel.
2. Tap Connect.
3. Locate and press the WPS on your router. 2GIG EDGE Panel will securely
connect with the router.
4. Once Authorization is successful, tap ACCEPT.
To Next Page
Loading...
Need help?
General
