Installation Guide for the 2GIG EDGE Security Panel
66
ANSI/SIA CP-01-2010 Features to Limit False Alarms
For compliance with ANSI/SIA CP-01-2010: Control Panel Standard - Features for False Alarm Reduction, the installer can set a variety of
different options designed to limit occurrences of a False Alarm.
ANSI/SIA CP-01-2010 2GIG System Feature Installation & Programming Guide
4.2.2.1 Exit Time Exit Delay
“Q201: Exit delay, in seconds (45-120)”
“Q116: Allow quick exit”
4.2.2.2 Progress Annunciation Exit Delay Announcement “Q201: Exit delay, in seconds (45-120)”
4.2.2.3 Exit Time Restart Exit Delay Restart “Q115: Exit delay restart”
4.2.2.4 Exit Error Exit Error See the User Guide for the 2GIG EDGE Panel
4.2.2.5 Unvacated Premises Auto Stay “Q114: Auto stay”
4.2.3.1 Entry Delay Entry Delay
“Q202: Entry delay 1, in seconds (30-240)”
“Q203: Entry delay 2, in seconds (30-240)”
4.2.3.2 Progress Annunciation Entry Delay Announcement “Q101: Enter installer code (4 or 6 digits)”
4.2.3.3 Disarm Disarming Features See the User Guide for the 2GIG EDGE Panel
4.2.4.1 Control Buttons Keyfob/Remote Arming Mode on System Not Ready. “Q121: Keyfob/remote arming mode on system not ready”
4.2.4.2 Manual Alarms Emergency Alarm Features See the User Guide for the 2GIG EDGE Panel
4.2.4.3 System Acknowledgment
Alert Keyfob Disarming After Alarm
Keyfob Arm/Disarm Conrmation
“Q119: Alert on disarm with keyfob after alarm”
“Q120: Keyfob arm/disarm conrmation”
4.2.4.4 Remote Arming Key Fob Arming “Q119: Alert on disarm with keyfob after alarm”
4.3.4.5 Remote Disarming Key Fob Arming “Q120: Keyfob arm/disarm conrmation”
4.2.5.1 Abort Window Abort Window Dialer Delay “Q205: Alarm abort window transmission delay”
4.2.5.1.1 Disarm Abort Window Dialer Delay “Q502: Periodic test, in days (0-255)”
4.2.5.1.2 Abort Abort Window Dialer Delay “Q502: Periodic test, in days (0-255)”
4.2.5.2 Alarm Transmission Abort Window Dialer Delay “Q205: Alarm abort window transmission delay”
4.2.5.3 Disarm Disarm See the User Guide for the 2GIG EDGE Panel
4.2.5.4 Cancel Window Alarm Cancel Time, Alarm Cancel Display “Q204: Alarm cancel time, in minutes (5-255)”
4.2.6.1 Use of Duress Feature User Duress Report “Covert Distress Signal”
4.2.6.2 Duress Code Duress Code “User Duress Pin”
4.2.7 Initiation of Manual Alarms Panic, Fire, or Emergency Alarm See the User Guide for the 2GIG EDGE Panel
4.3. Cross Zoning Cross Sensor Zones, Cross Sensor Timeout
“Q123: Cross sensor zones 99-100”
“Q209: Cross sensor timeout, in seconds (10-120)”
4.3.2 Swinger Shutdown Swinger Shutdown Count (1-6)
“Q208: Swinger shutdown count (1-6)”
“Q517: Alarm restore reports to CS”
4.3.3 Fire Alarms Fire & Carbon Monoxide Protection
“Sensor Type — 24-Hour Fire”
“Sensor Type — 24-Hour Fire Verication”
4.6.3 System Test
Console Test
Sensors Test
“Testing the System”
To Next Page
Loading...
Need help?
General
