Copyright © 2022 Nortek Security & Control LLC
9
Additional Accessories
The installer typically sets up the system to communicate with a variety of wired and/or wireless sensors. Some sensors are visible on the wall
or ceiling, such as Wireless Smoke/Heat/Freeze Alarms and Wireless Carbon Monoxide Detectors. Others may be hidden in door jambs, such as
Recessed Door/Window Contacts. Sensors might also be installed in additional locations, such as a Glass Break Detector and a Passive Infrared
Motion Detector.
NOTE: A variety of 2GIG and GoControl branded devices are compatible with the 2GIG EDGE Security & Smart Home System. Sensors
manufactured by other companies may also be compatible with the system. For information, visit dealer.2gig.com
IMPORTANT: To ensure that the system’s sensors are operating properly, it is important for 2GIG alarm dealers and system owners to
ensure sensor batteries and wireless signals are tested at least once a year.
Depending on the specic installation, systems may also be installed with one or more of the following 2GIG accessories:
Kits & Keypads
»
2GIG Control Panel Desktop Kit
»
2GIG EDGE Remote Keypad
»
2GIG PAD1
Antennas
»
2GIG External Mount Antenna
Sensors & Peripherals
»
2GIG Thin Door/Window Surface Contact
»
2GIG Recessed Door/Window Contact
»
2GIG Passive Infrared (PIR) Motion Detector
»
2GIG Glass Break Detector
»
2GIG Smoke/Heat/Freeze Alarm
»
2GIG Smoke/Heat Detector
»
2GIG Panic Button Remote
»
2GIG Carbon Monoxide Sensor
»
2GIG Takeover Module
»
2GIG Doorbell
»
Universal Garage Door Receiver
»
2GIG Tilt Sensor
»
2GIG Bypass Sensor
»
2GIG Flood Sensor
»
2GIG Repeater
NOTE: 2GIG eSeries (encrypted) & unencrypted 2GIG sensors are compatible with eSeries panels including 2GIG EDGE Panel.
Smart Home Controls
Consult your 2GIG alarm dealer for information about installing compatible Z-Wave smart home controls and Video Cameras including:
»
Lights
»
Locks
»
Thermostats
»
Garage Doors
»
Video doorbells
»
IP Cameras
»
Sirens
To Next Page
Loading...
Need help?
General
