2gig Technologies EDGE Installation Guide

Installation Guide for the 2GIG EDGE Security Panel
50
Choose one of these options:
»
† Enabled: Turns the feature ON.
»
Disabled: Turns the feature OFF.
Q212: Siren supervision time
Congures the system to supervise the wire between an external alarm sounder (if installed) and the 2GIG EDGE Panel. In the event that the
supervised wire is cut, the system waits the number of seconds specied here and then displays a trouble alert on the panel’s touchscreen. It also
transmits a trouble report to the Central Station.
Choose one of these options:
»
† Disabled: Turns the feature OFF.
»
15 Seconds: Turns the feature ON. 15 seconds after a wire cut is detected, the system displays a trouble alert on the touchscreen and
also transmits a trouble report to the Central Station.
»
30 Seconds: Turns the feature ON. 30 seconds after a wire cut is detected, the system displays a trouble alert on the touchscreen and
also transmits a trouble report to the Central Station.
»
45 Seconds: Turns the feature ON. 45 seconds after a wire cut is detected, the system displays a trouble alert on the touchscreen and
also transmits a trouble report to the Central Station.
Panel Congurations
Q301: Police emergency key
Congures the system to respond in two (2) ways when a user manually activates a panic alarm on the 2GIG EDGE Panel. The system can either
be set to emit a loud, patterned warning siren or to set off a silent panic alarm with no siren. You can also disable the Panic button so that it is not
visible on the 2GIG EDGE Panel.
Choose one of these options:
»
Disabled: Turns the feature OFF and hides the Panic button from the Alarm screen.
»
† Audible: Turns the feature ON. This makes the Panic button visible on the Alarm screen. The system sounds a loud, patterned warning
siren after the user activates a panic alarm.
»
Silent Panic: Turns the feature ON. This makes the Panic button visible on the Alarm screen. The system sounds a silent panic alarm
with no warning siren after the user activates a panic alarm.
Q302: Fire emergency key
Congures the system to show or hide the Fire button on the Alarm screen of the 2GIG EDGE Panel. When set to Audible, the button is visible and the
system emits a loud, patterned warning siren when a user manually activates a re emergency alarm on the 2GIG EDGE Panel.
Choose one of these options:
»
Disabled: Turns the feature OFF and hides the Fire button from the Alarm screen.
»
† Audible: Turns the feature ON. This makes the Fire button visible on the Alarm screen. The system sounds a loud, patterned warning
siren after the user activates a re alarm.
Q303: Emergency key
Congures the system to show or hide the Emergency button on the Alarm screen of the 2GIG EDGE Panel. When set to Audible, the button is
visible and the system emits a loud, patterned warning siren when a user sets off an emergency alarm on the 2GIG EDGE Panel.
Choose one of these options:
»
Disabled: Turns the feature OFF and hides the Emergency button from the Alarm screen.
»
† Audible: Turns the feature ON. This makes the Emergency button visible on the Alarm screen. The system sounds a loud, patterned
warning siren after the user activates an emergency alarm.
Q304: On-Board Camera
Congures the system to turn off the On-Board camera used any of panel features such as “snapshots” and “Face Recognition”.
Choose one of these options:
»
† Enabled: On-Board camera is on. Camera turns on momentarily when panel features, such as face recognition or photo snapshot,
are active
»
Disabled: On-Board camera is turned off. All features using On-Board camera are unavailable.
NOTE: This is a global setting.

2gig Technologies EDGE Specifications

General

Brand	2gig Technologies
Model	EDGE
Category	Security System
Language	English