2gig Technologies EDGE Installation Guide

Installation Guide for the 2GIG EDGE Security Panel
52
Troubles
Q401: Radio modem network failure time, in minutes
Congures the system to display a trouble alert on the touchscreen when the system loses its cellular radio network connection. The number of
minutes you specify here denes the amount of down time that must pass before the system issues a trouble alert report. Once network service is
restored for ve (5) minutes, the trouble alert condition automatically clears itself.
Choose one of these options:
»
0 Minutes: Turns the feature OFF. The system does not issue a trouble alert
»
1-255 Minutes: Turns the feature ON. Use the touchscreen’s numeric keypad to enter the number of minutes between 1 and 255.
»
† 30 Minutes: Turns the feature ON and issues a trouble alert on the 2GIG EDGE Panel after 30 minutes of down time.
Q402: Radio network failure causes trouble
Congures the system to display a trouble alert on the touchscreen when it logs a trouble alert condition with the cellular network connection.
The 2GIG EDGE Panel will display an alert message on the touchscreen after the number of minutes specied in Q401: Radio modem network failure
time, in minutes (0-255)
above expires.
Choose one of these options:
»
† Enabled: Turns the feature ON. The 2GIG EDGE Panel displays a visual trouble indicator after a cellular radio network failure.
»
Disabled: Turns the feature OFF. The 2GIG EDGE Panel will not display a visual indicator after a cellular radio network failure.
NOTE: Regardless of the setting selected here, a radio network failure will always be logged in the System History.
Once the network connection is restored, the system automatically clears the visual indicator. A record of the trouble alert condition is stored in
the System History.
Q403: Radio network failure reports
Congures the system to transmit a trouble report to the Central Station when the system detects a cellular radio network failure.
Choose one of these options:
»
† Enabled: Turns the reporting feature ON. The 2GIG EDGE Panel will transmit a trouble report to the Central Station after a cellular
radio network failure.
»
Disabled: Turns the reporting feature OFF. The 2GIG EDGE Panel will not transmit a trouble report to the Central Station after a cellular
radio network failure.
Q404: Broadband network failure time in minutes
Congures the system to display a trouble alert on the touchscreen when the system loses its broadband network connection. The number of
minutes you specify here denes the amount of down time that must pass before the system issues a trouble alert report. Once the broadband
connection is restored for ve (5) minutes, the trouble condition automatically clears itself.
Choose one of these options:
»
0 minutes: Turns the feature OFF. The system does not issue a trouble alert
»
1-255 minutes: Turns the feature ON. Use the touchscreen’s numeric keypad to enter the number of minutes between 1 and 255
»
† 30 Minutes: Turns the feature ON and issues a trouble alert on the 2GIG EDGE Panel after 30 minutes of down time.
Q405: Broadband network failure causes trouble
Congures the system to display a trouble alert on the touchscreen when it logs a trouble alert condition with the broadband network connection.
The 2GIG EDGE Panel will display an alert message on the touchscreen after the number of minutes specied in Q404: Broadband network failure
time, in minutes (0-255)
above expires.
Choose one of these options:
»
† Enabled: Turns the feature ON. The 2GIG EDGE Panel displays a visual trouble indicator after the broadband network failure.
»
Disabled: Turns the feature OFF. The 2GIG EDGE Panel will not display a visual indicator after a broadband network failure. Once the
network connection is restored, the system automatically clears the visual indicator. A record of the trouble alert condition is stored in the
System History.
Q406: Broadband network failure reports
Congures the system to transmit a trouble report to the Central Station when the system detects a broadband network connection.
Choose one of these options:
»
† Enabled: Turns the reporting feature ON. The 2GIG EDGE Panel will transmit a trouble report to the Central Station after a broadband
network failure.
»
Disabled: Turns the reporting feature OFF. The 2GIG EDGE Panel will not transmit a trouble report to the Central Station after a
broadband network failure.

2gig Technologies EDGE Specifications

General

Brand	2gig Technologies
Model	EDGE
Category	Security System
Language	English