3D Histech Pannoramic MIDI User Manual

Pannoramic MIDI 1.18 User’s Guide 4 Software Description
TMA tool
TMA tool is used for selecting TMA spots on TMA slides. You can set the selection settings
on the following four tabs:
Select panel
Figure 33 – TMA tool: Select
• To create a new TMA object, click New.
• To select an existing TMA object, click on the object name. The selected object
name will highlight.
• To delete an existing TMA object, click Delete.
Block panel
Figure 34 – TMA tool: Block
April 3, 2014 - Rev 1 3DHISTECH Ltd. 55(127)

3D Histech Pannoramic MIDI Specifications

General

Brand	3D Histech
Model	Pannoramic MIDI
Category	Laboratory Equipment
Language	English